2014 MICROSTEP Aquacut 4001.20W
![Used 2014 MICROSTEP Aquacut 4001.20W](https://i.machineryhost.com/b6952dc1851eeb44c81027066ea96703/large-used-2014-microstep-aquacut-4001-20-w.jpg)
Spezifikationen
Hersteller | MICROSTEP |
Modell | Aquacut 4001.20W |
Jahr | 2014 |
Zustand | Gebraucht |
Processing surface water jet | 4000x2000mm |
CNC machine control | iMSNC500 |
Pump | Hypertherm HyPrecision 50 OEM Pump |
Abrasive removal system | included |
Beschreibung
Machine is in very good condition, well serviced and can be inspected under power.
IMMEDIATELY AVAILABLE
Use: water and/or abrasive
Processing surface water jet: 4000x2000mm
Abrasive removal system: included
Max range Z-axis: 150mm
Drive: double-sided drag-free guide
Guide: linear ball guides for X, Y and Z axes
Height control with tactile sensor
Cutting accuracy: according to ISO 9013
Machine accuracy: EN 28 206
Positioning speed: up to 40,000mm/min in X direction
Energy connections: 400V, 50Hz, 16A, compressed air 6 bar
Allfi Abrasive cutting head
CNC machine control: iMSNC500
Automatic water level height control from the machine control
portal control points: 2
Sand flow controller
Sand flow monitor
Hypertherm HyPrecision 50 OEM Pump:
Max output pressure: 4100 bar
Output flow: 3.8 l/min
Man. Focus diameter: 0.35 mm
HD Pressure cylinder: single acting
Dimensions L x W x H: 178, 86.4 x 117 cm
Main motor: 50hp (37kW)
Electric: 380V/ 3F/ 50Hz, 71A
Hydraulic oil capacity: 150 liters
Cooling water: 7 liters
Weight: 1315 kg
Minimum water pressure on inlet: 2.5 bar
Double-sided powered with two-sided independently controlled gantry
Machine guides are linear guides that guarantee a long life and high accuracy
The guides on the gantry are protected with a concertina casing against splashing water and sand
Driven by AC servo motors on the X and Y axes with encoder directly on the motor shaft
The long guides of the machine are mechanically shielded with a metal shield
More information, video and pictures on request.